• Pack Size

This combination does not exist.

Add to Cart



A membrane-forming curing compound is a liquid material applied to concrete to restrict the loss of water during the early hardening period.

It consists of non-volatile solids mixed with either water or a solvent.

The solvent, or blend of solvents, can be an aliphatic or aromatic hydrocarbon, or other type of organic solvent.

After application, the volatiles evaporate leaving the solid material deposited as a thin film over the concrete surface.


SURFACE-CURE W CURING COMPOUND is a Class A curing compound for use on new concrete that facilitates maximum moisture retention through 28 days curing period to maximise concrete strength & durability.

SURFACE-CURE W, when applied by the correct method and at the recommended application rate, leaves a dried waxy film, as SURFACE-CURE W is based on petroleum waxes combined with other additives.

SURFACE-CURE W is a special wax in that it does not have the same OH&S issues* of causing pedestrian traffic to slip when walked on.

The film is drier, and it is easier to work. * when applied at the recommended rate.


Mix prior to use. Ensure SURFACE-CURE W is homogeneous.

Calculate area to be treated, pre-measure the volume of SURFACE-CURE W.

Apply one full coat forming a continuous film at a rate of 5m2/L. wet on wet, as required to obtain the necessary application rate or use the volume. Ensure there are no misses.

Download PDS  Contact Us

This is a preview of the recently viewed products by the user.
Once the user has seen at least one product this snippet will be visible.

Recently viewed Products