SURFACE CURE W (WAX) 1000L IBC
CLASS A, TYPE 1-D CURING COMPOUND. AS3799 APPROVED. TMR APPROVED.
A membrane-forming curing compound is a liquid material applied to concrete to restrict the loss of water during the early hardening period.
It consists of non-volatile solids mixed with either water or a solvent.
The solvent, or blend of solvents, can be an aliphatic or aromatic hydrocarbon, or other type of organic solvent.
After application, the volatiles evaporate leaving the solid material deposited as a thin film over the concrete surface.
SURFACE-CURE W CURING COMPOUND is a Class A curing compound for use on new concrete that facilitates maximum moisture retention through 28 days curing period to maximise concrete strength & durability.
SURFACE-CURE W, when applied by the correct method and at the recommended application rate, leaves a dried waxy film, as SURFACE-CURE W is based on petroleum waxes combined with other additives.
SURFACE-CURE W is a special wax in that it does not have the same OH&S issues* of causing pedestrian traffic to slip when walked on.
The film is drier, and it is easier to work. * when applied at the recommended rate.
Mix prior to use. Ensure SURFACE-CURE W is homogeneous.
Calculate area to be treated, pre-measure the volume of SURFACE-CURE W.
Apply one full coat forming a continuous film at a rate of 5m2/L. wet on wet, as required to obtain the necessary application rate or use the volume. Ensure there are no misses.
Once the user has seen at least one product this snippet will be visible.