AFILM ALIPHATIC ALCOHOL
TMR-approved evaporation retarder to be used in conjunction with Surface Cure range of curing compounds.
A-FILM is a water based aliphatic alcohol finishing compound designed for use on plastic (freshly poured and screeded) concrete, to reduce the evaporation of water during finishing operations.
Conditions under which an evaporation retarder like A FILM is required can vary greatly in ‘appearance’ with temperature of both the day, the concrete , humidity, and wind speed all contributing.
To assist the operator in determining the necessity for A FILM use please refer to the attached chart.
If the calculated evaporation rate is above 0.75kg/m2/hour, then A FILM should be applied.
A-FILM will not normally interfere with subsequent toppings, tiling, render, surface coatings etc. often used in industry.
AFILM is not considered to be a hazardous product.
A-FILM is NOT a curing compound.
A-FILM is approved by Main Roads Qld for use on concrete castings.
Surface Cure is a range of water based curing compounds complying with AS3799 and also approved by Main Roads.
Once the user has seen at least one product this snippet will be visible.